Naked iJust 2 Kit

NZ$104.80
Or 6 payments of $17.47 with
 
What's this?
Out of Stock
e-Liquid Strength Options
Naked iJust 2 Kit Options
Flavour - 1
Flavour - 2
Flavour - 3
Flavour - 4
e-Liquid UPGRADE
Enquire
Naked iJust 2 Kit - Complete
Naked iJust 2 Kit - Complete
Naked iJust 2 Kit - Complete
Naked iJust 2 Kit - Complete
Eleaf EC heads - 0.3ohm Heads - 5 Pack
iJust 2 by Eleaf
iJust 2 by Eleaf vs Joyetech AIO Size comparison
iJust 2 by Eleaf

Naked iJust 2 Kit - Complete

Released by Naked Vapour 16-5-16

The Naked iJust Kit 2 is a complete package that has everything required to start vaping - this kit is quite possibly the fastest vapour producing device combo we have found to date (as at May 2016) - + also retains very good ease of use, vapour produced is effortless, full of flavour and also offers great value!

  • Suitable for first time AND experienced users

The iJust 2 is produced by Eleaf - these components are designed to be used together bringing sub ohm vaping to the masses!

The vapour produced is very fast, effortless, full of flavour and adjustable with built in airlfow control to further fine tune the users desires.

Bottom filling is a breeze, along with the unique head system allowing the user to replace the head when required just as easily.

We offer this Kit in a couple of options - default is the complete kit - this includes additional replacement heads & made to order Naked Vapour e-Liquids to help get you going.

  • We also offer an option to purchase the iJust 2 Kit by itself if the additional options are not required - see drop down boxes upper right.

Features

  • 2600mAh integrated battery  - SUB ohm capable -  510 connection type - Spring loaded brass contact pin
  • 0.3ohm EC Head(s)
  • Large capacity 5.5ml Glass tank clearomizer - 510 connection type
  • Wide bore tip - 510 type
  • Airflow Control - Silicone ring airflow control that also helps protect the glass tanked clearomizer from knocks and bumps
  • Bottom Filling with easy head replacement
  • Micro USB Port for easy charging - acts as a passthrough, vape an charge!

 

What is supplied?

1 x iJust 2 Kit by Eleaf - includes 1 head @ 0.3ohm, USB charging cable & User Manual

5 x Replacement EC Heads @ 0.3ohm (6 in total with Complete Kit option)

4 x 10ml Naked Vapour e-Liquid's ready to use, see e-Liquid Options drop down box on the right hand side of this listing to choose strength , you may also choose 4 flavours from the other drop down boxes.

Double and triple your e-Liquid starter volume upgrade now offered! - see drop down boxes.

  • NB: See the drop down boxes upper right for all available kit options, please select and make your own specific selections to suit.

    By default all kits are 0 nicotine, it is your choice to include the optional FREE nicotine offered only with complete kit purchases.

    Please ensure you have read and understand all information on our Nicotine Base page before making any purchase with Naked Vapour

NB: 18mg strength may be too strong for most users - choose from drop down boxes accordingly

 

Warranty: 90 day RTB warranty on battery, DOA warranty on clearomizer. Warranty does not cover intentional or accidental damage, failure caused by overloading (dead short in an atomizer).

 

Refilling is straight forward

How to fill with e-liquid?

  • Unscrew the clearomizer from the battery
  • With the clearomizer removed from the battery, separate the lower section of the clearomizer, exposing the base with head.
  • Invert the tank section and fill with e-Liquid through the 2 slots (avoid the central airway path) - leave a small air gap.
  • Reassemble the clearomizer - ensure you do not cross thread
  • Wait 5 minutes to allow the e-Liquid to truly saturate the coil (first fill only, it is recommended to prime a new head first - this allows the internal wicking to be fully saturated to avoid dry burning)
  • With the airflow control wide open, vape a few times without firing to help aid e-Liquid saturation.
  • Turn the MOD itself on by clicking the button 5 times within 2 seconds if it is off - Vape away!

 

First time usage guide

Read this listing and read any supplied user manuals before use

Thanks for choosing to purchase from Naked Vapour

  1. First step is to top off the charge in the ijust 2 battery - do this by connecting the suppiled USB cable to the micro USB port on the battery and to a suitable powered USB source (5v at 1A)
  2. Next step is to open the tank and fill with e-Liquid (as described above)
  3. Once the battery is fully charged (2-3 hours) turn it on with 5 clicks of the main button (this needs to be completed within 2 seconds)
  4. Press the button and vape - adjust the airflow control on the clearomizer to suit your own vaping style
  5. Enjoy
NZ$104.80
Or 6 payments of $17.47 with
 
What's this?
Out of Stock
e-Liquid Strength Options
Naked iJust 2 Kit Options
Flavour - 1
Flavour - 2
Flavour - 3
Flavour - 4
e-Liquid UPGRADE
Enquire
iJust 2 by Eleaf
iJust 2 by Eleaf
Size comparison
Naked iJust 2 Kit - Complete
Eleaf EC heads - 0.3ohm Heads - 5 Pack
Naked iJust 2 Kit - Complete
NZ$104.80
Or 6 payments of $17.47 with
 
What's this?
Out of Stock
e-Liquid Strength Options
Naked iJust 2 Kit Options
Flavour - 1
Flavour - 2
Flavour - 3
Flavour - 4
e-Liquid UPGRADE
Enquire